Alienware AW2725QF: Two-minute review
The idea of using pixel doubling to turn a 4K monitor into a native 1080p panel isn’t new. But it hasn’t been very successful so far. Can the new dual-mode Alienware AW2725QF do anything to change that, or will it prove just another failed attempt at having both high-res visual sizzle and high-refresh speed in a single monitor?
Apart from the dual 4K and 1080p modes, this Alienware panel looks like it has a decent shot of qualifying as one of the best gaming monitors out there. It runs at up to 360Hz and boasts a claimed response time of just 0.5ms. That’s seriously fast for an IPS-type LCD monitor.
It also sports HDR 600 certification and both G-Sync and FreeSync support. If there’s one area where it’s a little lacking, it’s connectivity. You do get a USB hub, but there’s no USB-C input for single-cable connectivity, which is a pity.
Alienware AW2725QF: Price and availability
How much does it cost? $599 / £599 (estimated) / AU$899 (estimated)
When is it available? Available now
Where can you get it? Available in the US
At $599 in the US, the Alienware AW2725QF is fairly pricey for a 27-inch 4K gaming panel that lacks a mini-LED full array backlight. The larger 32-inch Gigabyte M32UC is actually cheaper. So you’re really going to have to want that dual-mode functionality.
Whether it’s worth the money is a tricky call. It certainly looks a little better at 1080p than the dual-mode LG UltraGear 32GS95UE. But it’s ultimately a bit of a niche feature. The good news is that purely as a high-refresh 4K panel, the Alienware AW2725QF is an absolute zinger and nearly worth the asking price simply on those terms.
For now, pricing in the UK and Australia hasn’t firmed up. But we expect the market positioning to be pretty similar. In other words, it’ll be more expensive than a regular 4K panel of similar specs minus the dual-more functionality.
Alienware AW2725QF: Specs
| Screen size: | 27-inch |
| Resolution: | 3,840 x 2,160 |
| Brightness: | 450 nits SDR, 600 nits HDR |
| Color coverage: | 95% DCI-P3 |
| Response time: | 0.5ms GTG |
| Refresh rate: | 180Hz (4K) / 360Hz (1080p) |
| HDR: | HDR 600 |
| Features: | Dual-mode 4K / 1080p, IPS panel, HDMI 2.1 x2, DisplayPort 1.4, USB hub with 3x USB-a and 1x USB-C |
Alienware AW2725QF: Design and features
For a monitor from an out-and-out gaming brand like Alienware, the AW2725QF is pretty restrained. Yes, there are a few RGB flourishes including the power button and logos on the rear (all fully configurable) and hexagonal base design. But for the most part, it’s pretty businesslike and sober suited, though the slim bezels do make for a suitably contemporary overall vibe.
Is that a disappointment? Might Alienware customers expect something a little more extroverted? Possibly. But fussier styling tends to date faster, so the restraint Alienware has shown here will probably be welcome for most users, as will the solid build quality and full range of adjustment, including tilt, height, swivel and pivot into portrait mode.
The OSD menu is similarly comprehensive with settings for pretty much everything you need.
It’s a fairly logical menu and makes it very easy to jump between the 4K and 1080p modes. You simply hit the main OSD menu selector button twice to toggle between the two modes. Less impressive is the display’s connectivity.
The two HDMI and single DisplayPort inputs all support the full 4K at 180Hz resolution, which is good. There’s also a USB hub that includes two USB-A ports at the rear, plus a USB-A and a USB-C on the lower bezel. But there’s no USB-C input and thus no single-cable connectivity option for laptops.
Image 1 of 3
Some would argue that’s fine for a gaming display. Given the limitations of USB-C power supply and the elevated power consumption of a proper gaming laptop, you can’t really keep one fully juiced with a USB-C cable.
But it would still make this a more versatile display to offer USB-C upstream connectivity. With a USB-C input, you could share this panel between a gaming desktop and a laptop. And who knows what you might like to do with it in future. With USB-C, you simply have more options and with the price point Alienware has gone for, it’s a thoroughly reasonable expectation.
The Alienware AW2725QF also lacks an audio line-out jack, which can be handy for headphones. Again, it’s not exactly a deal breaker. But this isn’t a cheap display and it’s the kind of feature you’d have thought Alienware would throw in just to cover all the bases on a premium monitor.
Alienware AW2725QF: Performance
The Alienware AW2725QF’s IPS LCD panel makes a very strong first impression. It’s extremely bright and punchy, with up to 450 nits in SDR mode and 600 nits peak for HDR. It’s also beautifully calibrated in sRGB mode, with rich but accurate colors.
Of course, in default 4K resolution, the pixel density is super sharp and crispy, so fonts look fab. In-game, there’s a crazy amount of detail to go with the visual sizzle. This is a very sweet looking panel.
It’s also seriously fast for an IPS display. Alienware claims 0.5ms GTG response for the Extreme setting in the display’s Overdrive submenu. That does bring in a tiny bit of overshoot and inverse ghosting. But the two less aggressive options are still very fast and look just great. In fact, this panel is fast enough that pure speed is barely a concern. Or a reason to upgrade to an even more expensive OLED.
The same can’t be said for the HDR performance and more broadly contrast and black levels. This monitor is edge-lit and does not have full-array local dimming. So, there’s plenty of light bleed and relatively poor contrast, which goes with the territory with any LCD panel without local dimming. SDR colors also aren’t terribly well calibrated in HDR mode, so you’ll want to switch between modes depending on content type, which is a bit of a pain.
But what about that secondary 1080p mode achieved via pixel doubling? The idea is that for some game types, such as online shooters, you want more speed not more pixels. So, the 1080p mode offers a boost up to 360Hz refresh and is easy to access.
As for how it looks, well, it doesn’t quite look like 1080p on a native 1080p display. It’s certainly better than the similar feature on LG‘s own dual-mode 4K OLED, the UltraGear 32GS95UE-B.
That might be thanks to the conventional RGB subpixel layout of this IPS display. The superior pixel density will help, too. Whatever, the results on the desktop are fairly good, though you wouldn’t confuse it with true native. Everything looks just a little jagged and pixelated.
In-game, for the most part, the 1080p mode works better and is very playable to the extent that you forget it isn’t true native 1080p much of the time. The exception is that just occasionally, certain details can look quite messy and pixelated. One example is fine foliage and grass. When it happens, it can be pretty ugly.
In the end, there will always be shortcomings with pixel doubling, but this display does it better than any yet, including that LG, which looks soft and blurry by comparison.
Should I buy the Alienware AW2725QF?
| Attributes | Notes | Rating |
|---|---|---|
| Value | As a pure 4K panel, the Alienware AW2725Q is pricey. However, it’s a very nice example of the breed and if you really want the dual-mode functionality with 1080p support, it’s very appealing. | 3.5 / 5 |
| Design | Alienware has come over all sober for this high-spec, dual-mode 27 incher. Most buyers will probably welcome that, but some will miss Alienware’s characteristic flair and design cues. | 4 / 5 |
| Performance | As 4K IPS gaming panels go, the Alienware AW2725Q is an absolute zinger and probably the quickest display of its type. But OLED panels are quicker still and offer much better HDR. | 4.5 / 5 |
| Average Rating | The Alienware AW2725Q is a very sweet 27-inch 4K gaming panel. The dual-mode functionality is fun if imperfect, but the HDR performance could have you hankering for an OLED. | 4 / 5 |
Buy it if…
Don’t buy it if…
Also Consider
| Screen size: | 32-inch |
| Resolution: | 3,840 x 2,160 |
| Brightness: | 350 nits |
| Color coverage: | 93% DCI-P3 |
| Response time: | 1ms MPRT |
| Refresh rate: | 160Hz |
| HDR: | HDR 400 |
| Features: | VA panel, HDMI 2.1 x2, DisplayPort 1.4, USB-C with 18W PD |
| Screen size: | 28-inch |
| Resolution: | 3,840 x 2,160 |
| Brightness: | 350 nits |
| Color coverage: | 90% DCI-P3 |
| Response time: | 5ms GTG |
| Refresh rate: | 60Hz |
| HDR: | HDR10 |
| Features: | IPS panel, HDMI 2.0 x2, DisplayPort 1.2 |
How I tested the Alienware AW2725QF
I rigged up the Alienware AW2725QF as my primary display for a week. The aim was to use it across a wide range of applications to get a really good feel for how it delivers in both 4K and 1080p for everything from daily desktop duties to hardcore gaming sessions.
As a 4K IPS panel, it’s actually well suited to precision productivity. But what the Alienware AW2725QF is really built for is gaming, and for the most part it’s pretty stellar. I assed everything from color accuracy and response to latency and HDR performance.
It was particularly interesting to see how it stacked up against LG’s dual-mode OLED display, not to mention all the other recent OLED monitors, numerous examples of which I’ve reviewed. Plenty of more conventional 4K gaming panels have passed under my beady gaze, too, so putting the Alienware AW2725QF into context was certainly intriguing.
First reviewed September 2024
